A Short Reset For Skilled Hands
The refresher course is a hands-on session for people who already know the basics of handheld laser welding but need to clean up technique, recall safety steps and work with more confidence again. It is useful after a break from welding, when a team has taken on new work, or when a workshop wants a standard approach for small fabrications and repair jobs. The focus is practical, with time on joint prep, torch angle, travel speed, bead appearance and safe start-up and shut-down routines.
We keep the session focused on real workshop work rather than theory only. Learners practise with controlled pieces so they can see how small changes affect heat input, overlap and finish. The aim is to rebuild good habits quickly, without wasting material or time.
- Best for returning learners and workshop operators
- Suitable for mild steel, stainless steel and selected thin-gauge work
- Useful for repair, fabrication, maintenance and light production settings
Course Options And Group Sizes
The refresher can be arranged for one learner or a small team. Smaller groups give more time on the torch and more individual correction, while team sessions help supervisors align everyone on the same safe method. For businesses in Gauteng, the East Rand and further afield, we can structure the content around the materials and jobs your workshop handles most often.
The course is practical and time efficient, so it works well for staff who cannot be off the floor for long. If your team includes mixed experience levels, we can split the session into short demonstrations and supervised practice blocks. That way experienced operators still get value and newer hands are not left behind.
- One learner refresher
- Small team refresher for workshop staff
- Supervisor focused coaching for process control and consistency
- Optional follow-up visit for checks and corrections
What We Cover In The Session
Each refresher revisits the parts that matter most in handheld laser welding. That includes machine start-up, wire feed handling where relevant, torch grip, focus distance, alignment, seam tracking and stopping without overheating the job. We also look at when to slow down, when to clean the surface and how to read the weld pool so the learner can spot trouble early.
Safety is part of the work, not an extra. Handheld laser welding uses laser equipment that must be treated with care, with correct eye protection for the laser class in use, proper shielding where needed and active fume extraction. We also check cable management, safe work spacing and how to keep the area clear of reflective surfaces. A small slip here can turn into a bad day fast, so the reminder is worth it.
- Safe start-up and shut-down procedure
- Laser class awareness and eye protection checks
- Fume extraction and ventilation basics
- Torch control, seam tracking and finish quality
Installation, Power And Gas Needs
The refresher course can be run in our Boksburg base or on site if your workshop is ready for hands-on work. For on-site training, the space should have stable power, a clean bench area and enough room for safe movement around the welding point. In areas where load shedding or voltage dips are common, we advise checking the supply before the session so the equipment can run without interruptions.
Most handheld laser welding setups need a suitable electrical supply, clean dry air where required, and the correct shielding gas arrangement for the material and process being taught. The exact setup depends on the machine and application, so we confirm the power and gas needs before the session. Coastal sites may also need a bit more care with storage because humidity can affect consumables and electrical connections if equipment is left open.
- Stable mains power and safe earthing
- Clear workspace with no loose clutter around the weld area
- Correct shielding gas supply where the process requires it
- Fume extraction or local extraction positioned properly
Starter Kit And Consumables Review
Many learners pair the refresher with a starter kit review, especially if they are setting up at a new site or taking over a workshop unit. A good kit should support day to day practice without creating wasted spend on items that do not suit the actual work. We check what is included, what needs replacing and what should be kept as spare stock.
The course can also help with starter kit setup, consumables planning and basic workflow advice. That includes checking the torch consumables, protective gear, cleaning tools, sample material and any extra items needed for maintenance. We do not push unnecessary extras. The point is to make sure the kit is practical, complete enough and ready for real work.
- Protective eyewear matched to the laser class
- Cleaning tools and surface prep items
- Spare consumables for regular use
- Storage case or organiser for field or workshop work
Care, Servicing And Follow Up Support
Handheld laser welding equipment lasts better when it is kept clean, dry and checked often. After each session, operators should inspect the torch, cables, lens areas and connections, then store the kit properly so dust and moisture do not build up. If the equipment is used in a coastal town, or moved between sites, more regular checks are worth doing because salt air and handling wear can show up quicker than expected.
We also cover basic servicing habits that support steady performance. That includes visual checks, consumable replacement, looking for heat damage and keeping extraction working properly. If your team needs it, we can return for refresher visits, technical help, supervisor coaching or a training document pack to keep the method consistent after the session.
What To Check When Ordering
Before you book the refresher, it helps to know who is attending, what material they work on and whether the session is for a single operator or a team. This makes it easier to set the pace and bring the right examples. It also helps us plan the practical side, from sample material to any site readiness checks that may be needed. A quick confirm up front saves back and forth later.
When you send an enquiry through the contact page, include the number of learners, the workshop location and the type of jobs you want to cover. If there are special site rules, power limits or extraction constraints, mention those too. We can then advise whether the refresher is best done at our Boksburg base or on site in Johannesburg, Pretoria, Durban, Cape Town, Polokwane or elsewhere in South Africa.
- Number of learners
- Preferred location and date window
- Material types and typical job sizes
- Any power, gas or extraction limits at the workshop
Key facts
| Course type | Hands-on refresher for returning handheld laser welding learners |
|---|---|
| Outcome | Certificate of completion from LaserWelder Training |
| Group size | Individual or small team sessions available |
| Training locations | Boksburg, Johannesburg, Pretoria, Durban, Cape Town, Polokwane and on site |
| Power needs | Suitable mains power and safe earthing, confirmed before booking |
| Safety focus | Laser class awareness, eye protection and fume extraction |
